Use Wi5 Zylog Router as a Repeater for your home router

Hi there here i've used Wi5 Zylog Router as a Repeater for my Tp link home router (which is connected to the internet through the lan).

Step 1 - First you need to reset your Wi5 Router.

Step 2 -  Enable WPS on Both Routers.

Enable and restart the Wi5 router...

Do the same for your Home Router (TP-link)

Step 3 -  Start PBC in Wi5 Router  and Your Home Router.

Step 4 - Wait for 10 seconds then your home router Shows that Connected Successfully and Restart your Wi5 Router.

Step 5 - Now you need to Set SSID for your repeater and Password.My home Router SSID is 

Please wait....

Now see Wi5 router just synchronize the settings from my Home Router(TP-Link)

Wireless->Basic Settings->Enable Universal Repeater Mode (So it will Act as an Access Point and Repeater simultaneously)  so here i gave Ext Server  -> Apply changes->Restart.

Now Set Password for Your Ext Server...

Wireless->Security->Select SSID->Ext Server->Encryption->WPA2->give any password and apply changes...If It's Prompt you to Restart then restart...

Step 6 -  That's it!!! now share your internet to your friends upto 50-80 ft. With these Zylog Router.

NOTE:

            1.Put Router Access Password for Both Routers so your neighbors or Strangers not able to hack your internet. 

            2. I've used two laptop's to configure. and I'm not master in Networking So Correct Me if i'm Wrong. 

If  you need help means comment here!!!!

Install Android apps to your SD card by default

Things we need:

1.Make sure that you have successfully installed USB driver for your android phone (adb driver)

2.Enable USB Debugging on the phone

3.Install Google’s Android SDK

4.Oracles Java SDK

5.Plug-in the Android Mobile Phone

Step 1 -  First we need to turn on USB Debugging

Step 2 -  Download Android Studio (SDK tools) here  and Java Development Kit JDK here

Step 3 -  Then Install Both Applications

Step 4 -  Now Goto C:\Program Files (x86)\Android\android-sdk and Run SDK Manager

Step 5 -  There are numerous packages in here but make sure that Android SDK Platform-tools is checked

Step 6 -  Click the Install packages -->  Click Accept License.

The packages should start to download and extract themselves accordingly.if you get message about Android Tools being updated click OK to close the window.

Step 7 -  now Go to C:\Program Files (x86)\Android\android-sdk\platform-tools

               Hold down the Shift key, then right click adb.exe and click Open command window here 

Step 8 -  Type adb devices in cmd to make sure the ADB can see your phone. 

adb devices

Step 9 -  To set the default installation location of your phone to your SD card type this

adb shell pm setInstallLocation 2

Location 0 will force the application to install in phone memory.If you want to revert these changes just change that 2 to a 0 (that’s a zero).

Step 10 -   To check 

adb shell pm getInstallLocation 2

Step 11 -  type Exit and then Press Enter. now disconnect your phone and enjoy installing your apps in SD Card.

Note:

       Move Your Apps in the Settings-Applications-Manageapplications-Downloads-Click on any App that you need to move your downloaded apps to your SD card -Click move to SD Card.(Now this button is enabled)